Dynaverse.net

Taldrenites => Starfleet Command Mods => Topic started by: nx_adam_1701 on October 24, 2003, 08:38:05 pm

Title: Spare Parts
Post by: nx_adam_1701 on October 24, 2003, 08:38:05 pm

What do I have to alter to change how many spare parts a ship can have??

Adam Out

Title: Re: Spare Parts
Post by: NuclearWessels on October 24, 2003, 08:46:43 pm

The damage control rating in the shiplist determines how many spares (max), but I'm not sure what the exact formula is

dave
 
EDIT: It's column EO if you're hunting for it
(OK OK, it's column EO whether you're hunting for it or not )

Title: Re: Spare Parts
Post by: nx_adam_1701 on October 24, 2003, 09:18:07 pm

I tested it dave and these are my results,

1=0
2=1 minimal 5 maximum
3=2 minimum 10 maximum
4=3 minimum 15 maximum
5=4 minimum 20 maximum      ******* as you can see 5 and 6 are the same
6=4 minimum 20 maximum                
7=5 minimum 25 maximum
8=6 minimum 30 maximum
9=7 minimum 35 maximum
10=8 minimum 40 maximum

Title: Re: Spare Parts
Post by: FireSoul on October 25, 2003, 01:03:50 am

Damage control here represent how many damage control boxes there are on a ship. It's different than SFB's, yet very similar. Here's a SFB Tournament SSD:

 http://www.starfleetgames.com/sfb/tournament/ssd/fed.gif

On this Fed TCA, there are 6 DamCon boxes (track is beside #5 shield), but a max DamCon rating of 4. The shiplist requires the # of boxes for damcon, not it's rating.

The max # of spare parts are based on this. I think it's DamCon Rating * 5. I hope this helps.
-- Luc

Title: Re: Spare Parts
Post by: nx_adam_1701 on October 25, 2003, 03:13:45 am

yup
adam out

thx