Dynaverse.net

Taldrenites => Starfleet Command Models => Topic started by: starforce2 on November 12, 2003, 12:01:23 am

Title: Wont anyone update this design?
Post by: starforce2 on November 12, 2003, 12:01:23 am
I've tried pestering moonraker but that's gotten me nowhere. Infact, I haven't ever heard from him lately.

http://www.strategyplanet.com/sfc/omega/shipyards/moonraker/oldthesius.jpg

if that doesn't work:
http://www.strategyplanet.com/sfc/omega/shipyards/moonraker/moonraker.shtml
and scrool down to the pair of klingon ships, you'll see an excelcior kitbash above them.


Anyways, it's a really good design but does anyone actualy use 12 sided sacuers any more? Could probably use 1701-B nacelles anyways.

Anyways, I was hopeing someone would be interested so this ship isn't doomed to the realm of low poly for all of eternity.
Title: Re: Wont anyone update this design?
Post by: Kaenyne on November 12, 2003, 08:12:23 am
I second that motion.

This is a nice ship, but is "behind the times" graphically.

An update would really make her shine.
Title: Re: Wont anyone update this design?
Post by: Major A Payne on November 12, 2003, 11:23:49 am
Starforce. Contact me and give me some better details. I can't convert it to MOD format as I don't have the modding knowledge, but I can heavily update the mesh if you like. I'm not usually on ICQ, but have started using AIM now (Major104), so give me a yell.
Title: Re: Wont anyone update this design?
Post by: Viper/VR on November 12, 2003, 06:23:20 pm
Quote:

 I can't convert it to MOD format as I don't have the modding knowledge



I can lend a hand there if need be
Title: Re: Wont anyone update this design?
Post by: starforce2 on November 12, 2003, 07:38:49 pm
Quote:

Starforce. Contact me and give me some better details. I can't convert it to MOD format as I don't have the modding knowledge, but I can heavily update the mesh if you like. I'm not usually on ICQ, but have started using AIM now (Major104), so give me a yell.  



that depends on if your update is some low end armada class. I plan on using this baby in BC as well, need something a bit on the beefy side.
Title: Re: Wont anyone update this design?
Post by: Major A Payne on November 13, 2003, 09:17:59 am
Unlikely, seeing as I'm not planning on using this is Armada. I can try for around 6k in polys, but it'll take me a while as I'll have to find some very high res textures (minimum 1024*1024). Plus the only part I may have problems with is the engineering hull. I'm still going to give it a go anyway, and see how it comes out. The chimera didn't come out to bad, so its just down to me practising a bit more.
Title: Re: Wont anyone update this design?
Post by: starforce2 on November 21, 2003, 05:44:08 am
buuuuuuuuuuuuuuuuuuuuuuuump

anyone start this project?