Dynaverse.net
Taldrenites => Starfleet Command Models => Topic started by: Rod O'neal on January 20, 2004, 06:17:18 am
-
I was wondering if anyone knows where I might get one? Or, if anyone would consider making it, please? I haven't seen an actual SFB mini for it or any type of conceptual art. From the SSD I'd imagine it to be configured like the Stargazer (4 nacelles, 2 top/2bottom), but with a Miranda type weapon pod for the RA option mts.
The ship is pretty configurable. It has 2 rear arc option mts, 4 non weapon option mts in the rear of the main hull, and the 4 APR (also in the rear of the main hull) can also be swapped out for nonweapon systems. I've used the 8 nonweapon opt mts as shuttle bays in my shiplist to convert it into a light carrier variant. If there isn't one already out there, would anyone be willing to make one?
-
This sounds like a job for...Magnum357!
What do ya think?
(Don't want to volunteer you for anything Magnum, I just think your SFB ships kick booty and that makes you a prime candidate!)
-
I've been using this:
I know it's got TMP warps, but start from this to describe your needs?
.. and then there's the F-HDW from fleetdock 13..
-
Hey Kaenyne, thank you for the kind words. I'm glad a few people do like my SFB work. Actually, the HDW is on my "too do" list, but unfortunetly I don't have the SSD.
I really have no clue what the ship looks like. I have an SSD of the DW which I definitly have a unique idea design for, but the DW is waaaaayyy down the road in projects.
At the moment, I'm working on the Fed Police Cutter.
-
Hey there Magnum357!
I really like your SFB CA and her sister ships you made recently. They are a really neat take on these otherwise traditional ships.
You'll always have me as a fan!
-
i have a fhdw but i don't know if its the right ship its a baker class
-
Quote:
Hey Kaenyne, thank you for the kind words. I'm glad a few people do like my SFB work. Actually, the HDW is on my "too do" list, but unfortunetly I don't have the SSD.
I really have no clue what the ship looks like. I have an SSD of the DW which I definitly have a unique idea design for, but the DW is waaaaayyy down the road in projects.
Check yer PM's.
-
Hey Rod, I am using P81's Archangle; its a kitbash of an Akyazi Perimeter action ship with four warp engines and a Miranda torpedo bar placed below the saucer.
I don't have any pics handy....
KF
-
go check my page at: http://www.freewebs.com/eras-of-war/ for the fhdw tmp version, if its not that well i might not have it
-
I always thought the Phobos looked like a good HDW. It has a weapons pod with a rear torp. Good design and well made model.
here are some pics:
-
Thanks everyone for the responses. There's some very nice models at your sight, Don. I'm gonna get me some.
FireSoul, I know that you have R6. The Fed on the cover just needs a second lower nacelle (and TMP styling) and it'd be perfect. Where the drones are launching from could be where the RA opt mts go. The rear deck could be configured for the NW option mts. At least that's what I have in my head.
Azel is going to do one of his conceptual drawings for me (I'm not going to give you guys the opportunity to laugh at me by trying to do it myself.
).
Thanks again, everyone.
-
The Phobos isn't bad at all. You're right, it would make a good HDW. Just mirror the nacelles to add 2 two the bottom. The greyed area on the front of the impulse deck could be where the non-weapon opt mts are.
-
Never fear
I am on it 
-
Thanks Azel. You 'da man.

Hey Don, I didn't see the "Charger" class at your sight that Stylsy retextured. I'd like to get it, if possible.
-
Quote:
I always thought the Phobos looked like a good HDW. It has a weapons pod with a rear torp. Good design and well made model.
here are some pics:
Dizzy can you PLEASE send me the saucer textures you have there for the Phobos? I really want to add this to the FASA Collection as a variant.
Rod, check out Potempkin's signature with the Archangel picture in it.
KF
-
Quote:
Thanks Azel. You 'da man. 
Hey Don, I didn't see the "Charger" class at your sight that Stylsy retextured. I'd like to get it, if possible.
what kind of ship it is?, i might not have it
-
Quote:
Quote:
I always thought the Phobos looked like a good HDW. It has a weapons pod with a rear torp. Good design and well made model.
here are some pics:
Dizzy can you PLEASE send me the saucer textures you have there for the Phobos? I really want to add this to the FASA Collection as a variant.
Rod, check out Potempkin's signature with the Archangel picture in it.
KF
can you send me the mod by email, will be great with the other destroyer. donkarnage@videotron.ca
-
Ok here's my 2 cents on the subject
The Top is the Vigillance-Class (a little more daring
)
The Bottom, the Alliance ( more Traditional??? )
I am working on the top Veiws now...but here is the Top saucer view of the Alliance 
The nacelles are placed similar to the Constellation-Class...but will be wider apart...
sorta just past the sensor pallets (those long rectangles
) with Torpedo tudes in between them 
Enjoy
-
i will try to make something like that (if its not too big for milkshape)
-
Hey what would be the chances of getting that texture in a download.
-
a heavy war destroyer? hm, id love to see the spectre done. its a very nice ship wich looks fast and looks different from all those conny like ships.dont get me wrong - i love the conny and most of the kitbashes made of her parts but the feds can use some ships wich have an own style.
here are the pics from masaos ubercool starfleet museum site:
http://www.starfleet-museum.org/spectre.jpg
isnt that a beauty?
imagine the loadout of it: 10 standart phasers, 2 megaphasers and 4 torptubes (wich means 8 torpedos if those tubes are the same as on the conny refit)
the story behind the ships tells its a intellegence ship(i read something about a cloaking device buti might be wrong) but it think it would make a real cool wardestroyer or an x ship.
i love that design.
i know skinman began aspectre class ages ago. but someone should finaly bring the spectre to sfc. if someone would make that ship i would try to help whereve i can. i might make some textures for it (i cant aply them so the modeler should make some basic textures wich i would modify
) or i would make some nosearts for it.
spectre class is just too cool
-
Dont get me wrong, i like the Spectre too, to an extent.
A) the markings arent pretty, i think, it looks too much like a ship the Orions would use, not the Federation
2) the nacelles. Round nacelles in TMP in my mind = bad.
III) the saucer doesnt look like a feddie design either
And where is the Deflector?
-
well , the saucer design my be alot different from other tmp ships but i dont think that would be so problematical.its not a very commen ship so it could be an experiment. and if the ship is a wardesroyer ,if its build for war, that saucer shape my give a smaler profile from above than a perfectly round saucer would. i dont care to much about markings , markings can be different from ship to ship - its a matter of taste i think.
the deflector might be in the small secondary hull or there might be a mirindalike deflector on the underside of the saucer section - i dont know but as it isnt shown in the picture its a matter of interpretation.
round engines? well they are rounded - but not realy round. excelsior nacces also are rounded sa that isnt a real argument.
however. i would love to see that ship in sfc. but thats just me. others might see this differently and thats whats discussion is all about.
damn i love that forum
.
greatings,
ed
-
Excelsior Nacelles however have the length to balance its shape and size.
I am unsure why i dont like the spectre as much as other TMP ships.
Maybe im just biased
EDIT: fixed spelling.
-
Quote:
Ok here's my 2 cents on the subject
The Top is the Vigillance-Class (a little more daring
)
The Bottom, the Alliance ( more Traditional??? )
I am working on the top Veiws now...but here is the Top saucer view of the Alliance 
The nacelles are placed similar to the Constellation-Class...but will be wider apart...
sorta just past the sensor pallets (those long rectangles
) with Torpedo tudes in between them 
Enjoy
WOW! I'm overwhelmed, man! Those are both really nice. Call me conservitive, but I like the bottom (traditional) design. Thanks a lot. Did someone say that they wanted to make one?
-
Huh,
I like the "Spectre" looks like a heavy fast attack . . I can the forrunner of the Intrepid design in her lines. 2variants? excelsior and the short engines after all feds did experimental craft too! The "splash" design on top different I dont mind it
Rod . .
I like the Vigillance . . she a destroyer or maybe a New Fast Cruiser . either way I can find room or make a class for that ship!
thx
arcanum
-
My email is in my bio.
Send me an email and I'll reply to it. Make sure you tell me what you want. Either the texture or the whole thing. I'll zip it to you.
-
Quote:
what kind of ship it is?, i might not have it
Don,
It's in Stylsy's post for the terran retextures that he's done. Top center. He gives you credit for it.

Stylsy,
I stole your pic, man. Thanks.
-
Hello All,I think all of you are phenom and then some when it comes to SFC models.
Anyway, I have an older model that I found on a European site that may interest you.It's low poly and not very detailed but it is a start if you want I can send it to you.It sounds like what you're looking for as the spectre platform.
-
Quote:
a heavy war destroyer? hm, id love to see the spectre done. its a very nice ship wich looks fast and looks different from all those conny like ships.dont get me wrong - i love the conny and most of the kitbashes made of her parts but the feds can use some ships wich have an own style.
here are the pics from masaos ubercool starfleet museum site:
http://www.starfleet-museum.org/spectre.jpg
isnt that a beauty?
imagine the loadout of it: 10 standart phasers, 2 megaphasers and 4 torptubes (wich means 8 torpedos if those tubes are the same as on the conny refit)
the story behind the ships tells its a intellegence ship(i read something about a cloaking device buti might be wrong) but it think it would make a real cool wardestroyer or an x ship.
i love that design.
i know skinman began aspectre class ages ago. but someone should finaly bring the spectre to sfc. if someone would make that ship i would try to help whereve i can. i might make some textures for it (i cant aply them so the modeler should make some basic textures wich i would modify
) or i would make some nosearts for it.
spectre class is just too cool
ABout this thing.. I've done some work in the past for a smaller class of ship. However, I kept the WIPs which could be used to create something similar to this. I used the lotus cargo ship's nose.. (Kobayashi Maru markings are still present.
If this is what you're looking for, then I think a bit of retexturing is all you need.
-
Looks like a mauler FS. DO the feds get maulers?
-
Quote:
Looks like a mauler FS. DO the feds get maulers?
No.. but I was thinking more of a Fast Destroyer which also do not exist.
-
It may just be a cool new Xship.
Mooonraker did this:
Did u get the CAD, FS?
Lets chat about it b4 u go posting it. See if any changes need to be made. Ive had requests for it.
-
Quote:
Quote:
what kind of ship it is?, i might not have it
Don,
It's in Stylsy's post for the terran retextures that he's done. Top center. He gives you credit for it.

Stylsy,
I stole your pic, man. Thanks.
its supose to be a cheetah class
but i don't care what name is call
-
Quote:
It may just be a cool new Xship.
Mooonraker did this:
Did u get the CAD, FS?
Lets chat about it b4 u go posting it. See if any changes need to be made. Ive had requests for it.
i got this one, i can put it on my website, its a new york class heavy destroyer
-
do any of you know if the gays at sci-fi art give prmtions to convert ther ships besides thachy that is i know hes got some sort of an esue with pepole converting his work i also know that there is at leest one romulan ship out there from sci-fi art
but im talking abault the fed ships are there any ?