Dynaverse.net

Taldrenites => General Starfleet Command Forum => Topic started by: mossy on January 28, 2004, 06:47:11 am

Title: can someone help?
Post by: mossy on January 28, 2004, 06:47:11 am

I just set up a home network using a belkin EtherFast Cable/DSL Router, which is really cool. But, I can seam to find away to play on-line games, Can someone help at all??  when i try to join the test host go's 90 secs 60 secs etc and doesnt start
thanks for any help given  

Title: Re: can someone help?
Post by: CmdrK on January 28, 2004, 08:45:35 am

Disclaimer: I don't have a router or cable modem at home.

But, in other threads I believe some ports have to be opened for internet gaming. The router's firewall/security may be blocking necessary ports.

Do a search of the forum and see if you can find anything out.
Try this thread -  http://forums.taldren.com/ubbthreads/showflat.php?Cat=&Number=255852&page=0&view=collapsed&sb=5&o=&fpart=1
 

Title: Re: can someone help?
Post by: Warden on January 28, 2004, 07:18:22 pm

Have a read through the network and multiplayer readme located in sfc3dir/help/docs or under the sfc3 group in the start menu, it lists which ports need to be opened, and examples for a few models.

If you still have problems have a read throught this thread as well as the one listed above, http://forums.taldren.com/ubbthreads/showflat.php?Cat=&Number=75277&page=0&view=collapsed&sb=5&o=2&fpart=1  

Title: can someone help?
Post by: mossy on January 28, 2004, 06:47:11 am

I just set up a home network using a belkin EtherFast Cable/DSL Router, which is really cool. But, I can seam to find away to play on-line games, Can someone help at all??  when i try to join the test host go's 90 secs 60 secs etc and doesnt start
thanks for any help given  

Title: Re: can someone help?
Post by: CmdrK on January 28, 2004, 08:45:35 am

Disclaimer: I don't have a router or cable modem at home.

But, in other threads I believe some ports have to be opened for internet gaming. The router's firewall/security may be blocking necessary ports.

Do a search of the forum and see if you can find anything out.
Try this thread -  http://forums.taldren.com/ubbthreads/showflat.php?Cat=&Number=255852&page=0&view=collapsed&sb=5&o=&fpart=1
 

Title: Re: can someone help?
Post by: Warden on January 28, 2004, 07:18:22 pm

Have a read through the network and multiplayer readme located in sfc3dir/help/docs or under the sfc3 group in the start menu, it lists which ports need to be opened, and examples for a few models.

If you still have problems have a read throught this thread as well as the one listed above, http://forums.taldren.com/ubbthreads/showflat.php?Cat=&Number=75277&page=0&view=collapsed&sb=5&o=2&fpart=1