Dynaverse.net

Taldrenites => Starfleet Command Models => Topic started by: FoaS_XC on July 11, 2004, 10:30:32 am

Title: Seraph's Early KCA design.
Post by: FoaS_XC on July 11, 2004, 10:30:32 am

(http://hosting.picgoo.com/uploads7/earlykca.jpg)
http://hosting.picgoo.com/uploads7/earlykca.jpg
*Treat the above link like Geocities, Copy it into your addressbar, add a space, then hit enter*

THe Nacelle config is like on ModelPlease's Sword of Khaless.
The semi-saucer that is normally on top of the head unit, is now on the bottom.
The bridge takes the form of a little outcropping and a spire on the head unit.
On the back of the head unit is the shuttlbay.
Note the keel which is about a third as thick as the neck.

Title: Re: Seraph's Early KCA design.
Post by: FoaS_XC on July 11, 2004, 10:36:13 am

Btw, what ever happened to the idea of using the Event Horizon from the movie of the same name, as an early klingon ship.

Title: Re: Seraph's Early KCA design.
Post by: Starforce2 on July 11, 2004, 03:14:27 pm

I like the head idea. Perhaps  using a rear end more like a D5 instead. And where are the nacelles going? Also, you  really need to get your self a fotopic account instead of geosh*tties. :o

Title: Re: Seraph's Early KCA design.
Post by: FoaS_XC on July 11, 2004, 08:44:39 pm

Nacelles are placed like ModelPlease's "Sword of Kahless" which can be found at his site.
or this ship (http://www.shipschematics.net/startrek/images/klingon/dreadnaught_kahless.jpg)

Title: Re: Seraph's Early KCA design.
Post by: ModelsPlease on July 11, 2004, 09:34:05 pm

Quote from: Furyofaseraph on July 11, 2004, 08:44:39 pm

Nacelles are placed like ModelPlease's "Sword of Kahless" which can be found at his site.
or this ship ([url]http://www.shipschematics.net/startrek/images/klingon/dreadnaught_kahless.jpg[/url])

Terradyhne did the one pictured ,and I asked him in another thread to please release it.The varient Wolfsglen did for me ( SOUL OF KAHLESS) has the narcells underneath the hull.Plus there is his other varient that placed the mega disruptors under the hull.
 ;D :thumbsup:
-MP

Title: Re: Seraph's Early KCA design.
Post by: KBF-Crim on July 12, 2004, 12:02:57 am

WOW....that almost screams double "mauler"...or even a pre X testbed for heavy disrupters...

Title: Re: Seraph's Early KCA design.
Post by: FoaS_XC on July 12, 2004, 12:11:15 am

what, my ship, or the Sword of Kahless

Title: Re: Seraph's Early KCA design.
Post by: markyd on July 12, 2004, 01:28:58 am

link is dead >:(

Title: Re: Seraph's Early KCA design.
Post by: ModelsPlease on July 12, 2004, 03:18:32 am

Quote from: markyd on July 12, 2004, 01:28:58 am

link is dead >:(

What link is dead ?

Title: Re: Seraph's Early KCA design.
Post by: markyd on July 12, 2004, 04:33:49 am

http://hosting.picgoo.com/uploads7/earlykca.jpg
this link is dead..

comes up with page not recognised... tried pitting into url and adding a space .. still no luck :(

Title: Re: Seraph's Early KCA design.
Post by: KBF-Crim on July 12, 2004, 12:13:40 pm

Quote from: Furyofaseraph on July 12, 2004, 12:11:15 am

what, my ship, or the Sword of Kahless

My bad...

The sword...

For the record...I LOVE non canon ships as long at they are themed correctly for the race they are made for...