Dynaverse.net

Taldrenites => Starfleet Command Models => WIPs => Topic started by: Kreeargh on October 01, 2005, 06:45:50 pm

Title: cvn65
Post by: Kreeargh on October 01, 2005, 06:45:50 pm

I needed a little break from another simmler project , i thought a few might like to see one in sfc so here she blows  first the wips  ;D
(http://sfcmodsrus.0catch.com/real/cvn65.jpg)
(http://sfcmodsrus.0catch.com/real/cvn65a.jpg)
(http://sfcmodsrus.0catch.com/real/cvn65b.jpg)

the hull is around 600 poly so far. I want to keep it below 3000 with some detail.

Title: Re: cvn65
Post by: Starforce2 on October 02, 2005, 01:45:00 am

is this going to be real wold canon or will you yamato-ize her to look like something from starblazers?

Title: Re: cvn65
Post by: Bernard Guignard on October 02, 2005, 06:58:35 am

Yep stick a couple of warp nacelles, an impulse deck on the aft and  on the command tower add a tmp Bridge and presto federaton carrier  ;D Nice work by the way you going to do the wwII version as well?

Title: Re: cvn65
Post by: Kreeargh on October 02, 2005, 02:32:33 pm

Quote from: Starforce2 on October 02, 2005, 01:45:00 am

is this going to be real wold canon or will you yamato-ize her to look like something from starblazers?

Im going for a 1980s real version if i can pull off some decent textures, ill let someone else trek it up if they so desire.

Title: Re: cvn65
Post by: wulf111 on October 03, 2005, 11:35:45 am

this would be a good start for the Prometheus that was attached to the SDF1 (Macross)