Dynaverse.net

Taldrenites => Dynaverse II Experiences => Topic started by: Kingalo on June 11, 2009, 03:11:16 pm

Title: Noob Rookie here!
Post by: Kingalo on June 11, 2009, 03:11:16 pm: Okay I have tried to follow these forums and I still can't log into Dynaverse, the Part under the name/password/username is still grayed out...

I have done this http://www.dynaverse.net/forum/index.php/topic,163378640.0.html (http://www.dynaverse.net/forum/index.php/topic,163378640.0.html) and I have done--

Name="ServerSetup"

[Settings]
SingleThreaded = 1
CreateCentralSwitch = 0
SinglePlayer = 0
BlockSize = 10000 // How many micro-seconds to spend on server side stuff before doing page flip
DelayMultiple = 1.0 // What multiple of time to wait before going back to server side stuff
PacketQueLimit = 75 // What

[RTI]
//IPAddr = "0.0.0.0:1234"
IPAddr = "209.69.154.13:2601"

[CentralSwitchSetup]
Listen = 0

[WONDirectoryServer]
ServerPath = "/StarFleetCommand2/Game/Release"

[WONDirectoryServer/Addresses]
//0="sfc2.west.won.net:15101"
//1="sfc2.central.won.net:15101"
//2="sfc2.east.won.net:15101"
0=client.sfc.dynaverse.net:15101
1=client.dynaverse.net:15101
2=sfc2.directory.stasis.ca:15101

[Clients]
ChatClient = 1
SecurityClient = 1

[Launch]

and I have done

[3D]
wireframe=0
windowed=0
zbuffer=1
lowres=0
driver=0
backdrop=1
shipstacking=1
ambientlighting=5.00
luminancetextures=1
luminancedamagetextures=1
spacedust=1

(Ambient lighting and spacedust are changed by me... you will be able to see the ships and also will be able to take some beautiful screen pics with the spacedust at "1" instead of the default 0.)

Then, at the very bottom of this file you will need to manually type in...

[Debug]
VollyInfo=1

and then save it. Do this on the line directly under...

WONNickname="whatever your name is"

-----

But I still cannot get into the Dynaverse, it lets me click the log in, I see the Hailing Systems Message, but the 2 Buttons on the bottom of the Page are Grayed out, and I have no clue what to do now.

------------------
System Information
------------------
Time of this report: 6/11/2009, 13:06:14
Machine name: KENNETH-PC
Operating System: Windows Vista™ Ultimate (6.0, Build 6002) Service Pack 2 (6002.lh_sp2rtm.090410-1830)
Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
System Model: 132-CK-NF78
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 2814MB RAM
Page File: 1439MB used, 4400MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: None
DxDiag Version: 6.00.6001.18000 32bit Unicode

----------------

Any assistance here, would be nice.
Title: Re: Noob Rookie here!
Post by: Kingalo on June 12, 2009, 01:14:52 am: I just tried to Disable FireWall and Now I get a Different Message, But... This is the Image I get as I was saying

(http://members.cox.net/socertese/New%20Bitmap%20Image.bmp)

As you can see it is Grayed out where the Login / Create Account is suppose to Be.
Title: Re: Noob Rookie here!
Post by: T-Rex_NT on June 12, 2009, 02:43:47 am: Go here:

ftp://www.dynaverse.net/sfc2_op/patches/sfc2_directory_server_updater.exe (http://ftp://www.dynaverse.net/sfc2_op/patches/sfc2_directory_server_updater.exe)

Do you use a router??

what kind??

I had a similar issue and the router was my problem.

Rex
Title: Re: Noob Rookie here!
Post by: Kingalo on June 12, 2009, 03:31:29 am: Yes, the router is a Linksys, and I are not on a static IP I use a DHCP connection. I did use that Patch that is actually what let me see those messages, Before, It would always have me forse Close the SFC game from sitting there for 30 minutes still saying Checking for updates each time.

The Model for the Linksys is a WRTS4GS v4

then we are using a Moterola Modem
model SB5120

Both which are up to date on drivers, and I have tried to DMZ Host, Tried to Port Forward took it off Disabled Firewall Ran GSA while doing it everything I could Possible think of, Started from scratch, Just says the same message behind firewall or not loged in.
Title: Re: Noob Rookie here!
Post by: Bonk on June 12, 2009, 05:28:47 am: Quote
Operating System: Windows Vista™ Ultimate (6.0, Build 6002) Service Pack 2 (6002.lh_sp2rtm.090410-1830

There is your problem. Have you got an XP install?

Here is where I ended up: http://www.dynaverse.net/forum/index.php/topic,163384057.msg1122928241.html#msg1122928241
A multiboot setup. (for the somewhat advanced user)
Title: Re: Noob Rookie here!
Post by: Kingalo on June 12, 2009, 03:17:18 pm: I do not have XP installed no, When I put my Cumputer together, By building it myself, I just went straight to Vista U.
Title: Re: Noob Rookie here!
Post by: Bonk on June 12, 2009, 04:02:20 pm: I have been steadily working on getting the OP Dynaverse client to run on Vista. Still no luck. (no client source so it is all hacking). I will keep trying though. In the meantime XP or earlier is required for the OP Dynaverse.

I wonder if EAW sufferes from the same problems? Has anyone tested it?
Title: Re: Noob Rookie here!
Post by: Kingalo on June 13, 2009, 12:30:47 am: Yes it does suffer the same, because I tried EAW before OP.... Question, My Dad is going to try Virtual PC, do you think that Might work?
Title: Re: Noob Rookie here!
Post by: FPF-Paladin on June 13, 2009, 09:50:43 am: Not sure about the tech issues, but Welcome to the community :woot:
Title: Re: Noob Rookie here!
Post by: Kingalo on June 13, 2009, 07:31:00 pm: :D Thanks My dad was trying Virtual PC, but he didn't give the VPC enough memory for the XP partician, sohe is going to retry it again.
Title: Re: Noob Rookie here!
Post by: Kingalo on June 15, 2009, 03:38:32 am: NOpe VPC doen't work and I figured it wouldn't before he tried it, because of how it runs... :-\