Dynaverse.net
Taldrenites => Starfleet Command Models => Topic started by: Klingon Fanatic on August 05, 2004, 11:01:45 pm
-
A BIG thanks goes out to IncursionX22 for taking up this "simple" kitbash initially and to Atheorhaven lending a hand as well as for bringing her home.
(http://klingonfanatic3.20m.com/images/scr00000.jpg)
http://klingonfanatic3.20m.com/images/scr00000.jpg
As you can see there is a slight mesh issue with the back of the "new" warp engines but as the Imperium/Stock RBC rarely raises it's wings in game [SFC:OP] it's hardly noticable.
(http://klingonfanatic3.20m.com/images/scr0000b.jpg)
http://klingonfanatic3.20m.com/images/scr0000b.jpg
I'll need to make a new readme file for this shortly but I'll hold off in case Atheorhaven or anybody else wants to make a final revision of this kitbash.
Maybe this kitbash will inspire a mod god to grant us a new version of the STOCK RBC ;)
In the meantime, it's so nice to see a decent non-Federation kitbash like this for a change. Thanks again guys. ;D
Qapla!
KF
-
Love it, man.
I post here in an attempt to have a great moddeller model a new Taldren-Style RBC.
-
As you can see there is a slight mesh issue with the back of the "new" warp engines but as the Imperium/Stock RBC rarely raises it's wings in game [SFC:OP] it's hardly noticable.
I'll need to make a new readme file for this shortly but I'll hold off in case Atheorhaven or anybody else wants to make a final revision of this kitbash.
Yeah, I just noticed it.. it came across when I brought over the engines. I'll fix it in a day or so...
-
Super !!!!!
I can't wait to d/l it :notworthy: :notworthy: :notworthy:
Mariano
-
I really wish someone could give the Goshawk and Cormorant from Unity tail and head light maps, even blank ones... ::)
;)
-
I really wish someone could give the Goshawk and Cormorant from Unity tail and head light maps, even blank ones... ::)
;)
If they can be d/l'ed outside a mod and you have a d/l link to them both.. (or are they the ones that KF pointed to earlier?) then I can add those at the same time as I fix the engine. It takes me little time to add in or remove illumination maps (as long as it's not 24+ materials in the mesh, then it takes longer)..
-
I really wish someone could give the Goshawk and Cormorant from Unity tail and head light maps, even blank ones... ::)
;)
Wasn't that done already for the Goshawk aka Legion Refit I retextured?
http://dynamic5.gamespy.com/~sfc/files/pafiledb.php?action=file&id=718
As for the current manifestation of the Imperium, I just noticed some missing polygons on the left rear INSIDE engines. I was hoping Atheorhaven will give it another quick look before the final release.
Also QobnuH has yet to respond to my request to use his RBC Imperium texture set on this Imperium kitbash, Trust me they will be better than the current set. ;)
Finally, on a historical note, this Romulan was one of the first Romulans I retextured with Atrahasis' D2 RBB textures before Ganymad came on the scene and Wowed us with his rendition of Thulls' Firehawk texture set. I would love to see what Ganymad could do for this ship but alas he has not been around for awhile.
Hang in there Romulan fans I will have this out as soon as I can.
KF
-
I really wish someone could give the Goshawk and Cormorant from Unity tail and head light maps, even blank ones... ::)
;)
If they can be d/l'ed outside a mod and you have a d/l link to them both.. (or are they the ones that KF pointed to earlier?) then I can add those at the same time as I fix the engine. It takes me little time to add in or remove illumination maps (as long as it's not 24+ materials in the mesh, then it takes longer)..
They can both be d/led from STGD.
http://www.stcd.sgnonline.com/downloads/pafiledb.php?action=category&id=74
-
Great job Atheorhaven! Really happy it got fixed. :) :thumbsup: YOU ROCK!
-
Bump for release info
-MP
-
Bump for release info
-MP
Engines on this are now fixed, MOD file will be going over to KF momentarily..
Also, used the time to standardize the LODs and now that I've figured them out.. future SFC 2 releases of mine should have them..
-
Bump for release info
-MP
Engines on this are now fixed, MOD file will be going over to KF momentarily..
Also, used the time to standardize the LODs and now that I've figured them out.. future SFC 2 releases of mine should have them..
KF using best Kirk voice:
"Atheorhaven your reputation as a miracle worker is secured! Well done!"
I'm in the process of coordinating getting QobnuH's Imperium textures to wrap up this fine kitbash and getting it hosted.
KF
-
KF using best Kirk voice:
"Atheorhaven your reputation as a miracle worker is secured! Well done!"
I'm in the process of coordinating getting QobnuH's Imperium textures to wrap up this fine kitbash and getting it hosted.
KF
Actually, do check it ingame and look for any more errors.. I didn't see any, but that doesn't mean that there aren't some with LOD2 and LOD 3...
-
KF using best Kirk voice:
"Atheorhaven your reputation as a miracle worker is secured! Well done!"
I'm in the process of coordinating getting QobnuH's Imperium textures to wrap up this fine kitbash and getting it hosted.
KF
Actually, do check it ingame and look for any more errors.. I didn't see any, but that doesn't mean that there aren't some with LOD2 and LOD 3...
The engines kind of hang in a small amount of empty space now between the hull and where they ended up but again in game you don't really notice. I think you did a fine job getting this kitbash to where it is now. I have no complaints.
Just waiting for QobnuH to chime in.
KF
-
The engines kind of hang in a small amount of empty space now between the hull and where they ended up but again in game you don't really notice. I think you did a fine job getting this kitbash to where it is now. I have no complaints.
Just waiting for QobnuH to chime in.
KF
There did have to be a small amount of space there simply because I didn't want to take the chance of having poly clashes.. I could've added in support pylons, but those would've had to have been fabricated from scratch. Should be good to go now..
-
Klingon Fanatic. I was on your web page and I saw some cool retextures. Any chance of you releasing your Ulysses and Lyran shuttle retextures. They look really cool.
-
Klingon Fanatic. I was on your web page and I saw some cool retextures. Any chance of you releasing your Ulysses and Lyran shuttle retextures. They look really cool.
LOL, the Ulysses is WZ45's with retextures I use are Ganymad's texture set with Moonraker's Ulysses Warp engine glows added to them.
Moonraker's Ulysses:
http://www.nightsoft.net/omega/moonraker/sfc2/moonraker_sfc2.htm
Wicked Zombie 45's Ulysses may be found here:
http://www.nightsoft.net/omega/drs/
Ganymad's retexture (see readme credits):
http://dynamic5.gamespy.com/~sfc/files/pafiledb.php?action=file&id=670
The retexture of Desty Nova's Lyran shuttle is ready to go [uses stock textures] but needs his OK to get posted.
If you are looking for something MORE specific, please post a pic here of what you are looking at so I can track it down.
Update on the Imperium:
QobnuH indicated to me that he will most likey retexture the Imperium with his texture set and he might add support struts to the warp engines. Now if he does this the readme file is going to get a bit bigger, LOL.
Wow! Talk about a SFC community project....
Qapla!
KF
-
Sorry about you not getting the pics KF,hopefully you can view them from here. I re-mapped the model similar to the regalhawk that I did.
I added engine struts on all nacelles. I don't know if this is what was intended,I am still very much a noob at this. I have had problems with power outs and intermittent internet access the past few days due to storms. All I have is milkshape ,so no break mod. I do not have a proper readme to go with this,so I would like one if you have it. I also need to have the original readme from the winged defender and the bright one (I think the were in the D2 pack) if anyone has them. If no objections from the original modeler,I will try to release them too.
(http://img.photobucket.com/albums/v29/QobnuH/Romulan/killerhawk4.jpg)
(http://img.photobucket.com/albums/v29/QobnuH/Romulan/killerhawk3.jpg)
(http://img.photobucket.com/albums/v29/QobnuH/Romulan/killerhawk2.jpg)
(http://img.photobucket.com/albums/v29/QobnuH/Romulan/killerhawk1.jpg)
-
;D Wow! OUTSTANDING!
Release please!
As for the Winged Defender and White Wind, they are both by P81 and if you need the readme for them I can e-mail you them.
Qapla!
KF
-
It would help to get the readme files on the rbc,winged defender, and bright one(not whitewind). The killerhawk and the regalhawk(stock engines) will be in the same file. The original break mods do work but of course revert to the original model.
As you said, I think the other roms I kitbashed are P81's from the D2 pack...Do you think this will be a problem?
-
It would help to get the readme files on the rbc,winged defender, and bright one(not whitewind). The killerhawk and the regalhawk(stock engines) will be in the same file. The original break mods do work but of course revert to the original model.
As you said, I think the other roms I kitbashed are P81's from the D2 pack...Do you think this will be a problem?
Strangely, I can't find my copy of the D2 readme/credit file or the ones that came with seperate d/ls for P81's Romulans.
Nope, no problem, so long as a readme file is included that credits P81 and any other person involved in making this happen.
Qapla!
KF
-
Please release and post a link please. I like the work on this one.
-MP
-
Please release and post a link please. I like the work on this one.
-MP
Ditto!
BUMP for news.
KF
-
;D Damn Romulans are denying the existence of another one of their ships...
BUMP for release news.
KF
-
very good work. I especially like the remade engine textures. keep up the great job.
-
Sorry guys, It will be very soon. Still Having intermittent problems with internet. I'm trying to get readme files together and minor tweaks.
The Imperium Killerhawk and the RegalHawk/Royalhawk will be in the same file since they utilize the same textures.
I also hope to release my D2 kitbashes at the same time(or shortly after).
-
Sorry guys, It will be very soon. Still Having intermittent problems with internet. I'm trying to get readme files together and minor tweaks.
The Imperium Killerhawk and the RegalHawk/Royalhawk will be in the same file since they utilize the same textures.
I also hope to release my D2 kitbashes at the same time(or shortly after).
Excellent news indeed! Perhaps our Romulan allies will have these ships ready BEFORE the Andromedans complete their starbase in the Desty Nova system ;)
KF