Dynaverse.net
Taldrenites => Starfleet Command Models => Topic started by: markyd on October 30, 2004, 09:50:53 am
-
Vigilant Class Original Design (Buzz) Reworked by (Az)
(http://www.myimgs.com/data/markyd/example.jpg)
Im still at a loss as to what needs to go here ???
The middle one I have worked out... but what would you stick on the left and right sides in here.. shuttle bays? Impulse engines?
-
Middle aft structure is impulse engines the other two either not sure. Its looks as though the central section needs stretching or rescaling , not by much it just looks a little on the small size compared to the warp nacelles.
But whatever happens it still looks good, a damn mean looking ship.
-
Strike my last, centre is fuselage outer sections are impulse engines by the looks of Atolm's schematic.
http://img15.exs.cx/img15/6066/FederationVigilant-Class01.jpg
-
IMHO I believe it should be impulse engines.If you think about the defiant,she had one small shuttle.Being a DD she doesn't really have room for traditional shuttlebays.But that's just my $.02.Great work markyd sir!
;D :thumbsup:
-MP
-
Ok thanks guys... ;)
-
3200 Poly's ;D
(http://www.myimgs.com/data/markyd/one.jpg)
(http://www.myimgs.com/data/markyd/two.jpg)
(http://www.myimgs.com/data/markyd/three.jpg)
(http://www.myimgs.com/data/markyd/four.jpg)
(http://www.myimgs.com/data/markyd/five.jpg)
Anything you guys would change or add or whatever before I begin working on textures?
-
Great stuff so far mate!!!
Ok the ship itself is too snub...gotta pull her length out some...the deflectors are good but the aft part of the deflector housing needs to be blended into the rest of the
hull....the foward pod has a deflector assembly aswell.....Inquiry though...what is that spine looking thing on the belly???
-
Great stuff so far mate!!!
Ok the ship itself is too snub...gotta pull her length out some...the deflectors are good but the aft part of the deflector housing needs to be blended into the rest of the
hull....the foward pod has a deflector assembly aswell.....Inquiry though...what is that spine looking thing on the belly???
Spine because it looked a little bland on the bottom and I thought the spine would tough her up a bit... (easily removed) Could you point out the forward deflector to me? and I will blend in the rear of the deflector pods.. although I thought they looked good that way... :-[
I'll do the changes now! ;D Thanks AZ
-
The basic design is very interesting... as well as looking good.
-
Thank Az & Buzz for the design... Im just making the model ;D
-
On the deflector... look at the front veiw in the main thread:
http://www.dynaverse.net/forum/index.php/topic,163347600.0.html
-
You mean inside the nose??? Ok.. I have made the other amendments you suggested... I will add the deflector in the nose then add the textures unless their is anything else.... say now people of forever hold your peace ;D
-
You mean inside the nose??? Ok.. I have made the other amendments you suggested... I will add the deflector in the nose then add the textures unless their is anything else.... say now people of forever hold your peace ;D
well show me the wip...and we'll confer lol
-
(http://www.myimgs.com/data/markyd/shotone.jpg)
(http://www.myimgs.com/data/markyd/shot2.jpg)
(http://www.myimgs.com/data/markyd/shot3.jpg)
(http://www.myimgs.com/data/markyd/shot4.jpg)
(http://www.myimgs.com/data/markyd/shot5.jpg)
(http://www.myimgs.com/data/markyd/shot6.jpg)
-
That looks good :)
-
Marky that is the dogs sphericals have some Karma.
-
Marky that is the dogs sphericals have some Karma.
rofl... thanks guys.. I will start the textures then :D
-
sorry to have been afk all afternoon.. I'm locating something for the back end for ya.. and the taper for the deflector areas !!
everything else looks great !
-
Dont dwell on it buzz buddy... give me the refinements so I can texture this little ship of yours... I'm itching!!! ;D
-
AWESOME!! ;D :notworthy:
-
Hey bud .. again I apologise for the inability get this to you in a timely fashion. I deeply appreciate your efforts and willingness to review this data.
Azel .. please review and see if I have missed something ( I know I'm still a little green )
I hope this helps .. BTW.. I agree with Azels previous assessments with one word of advice ... dot stretch too far .. it might look more like a Romulan design !! ;D ;D
At any rate .. hope this helps...
thanks again
(http://www.olbuzzard.com/DefiantRefit050.jpg)
-
AWESOME!! ;D :notworthy:
Thanks man ;D
Hey bud .. again I apologise for the inability get this to you in a timely fashion. I deeply appreciate your efforts and willingness to review this data.
Azel .. please review and see if I have missed something ( I know I'm still a little green )
I hope this helps .. BTW.. I agree with Azels previous assessments with one word of advice ... dot stretch too far .. it might look more like a Romulan design !! ;D ;D
At any rate .. hope this helps...
thanks again
([url]http://www.olbuzzard.com/DefiantRefit050.jpg[/url])
And thanks for going to detail here Buzz.... the sensor pod thingies already taper to the back now though az brought that up if you look in the second set of piccies you can see I changed that, photon tubes easily added will do it when I get back from work 2nite and as for the rear... should I just flatten the V out as I have the docking port already in there.. flatten out and stick on the tubes then it should be good to start the textures right
-
I think perhaps making it a lot "thinner" was a big pat of it. If ya choose to install a docking port (assuming that there is adequate space .. that's ok ... excellent idea . ) but don't make to the aft section too thick in order to accommodate it ...
Oh .. and yes there are 4 impulse engine thruster outlets ..2 top .. 2 bottom..
I hope this makes sense !!
again .. thanks so much for the efforts !
-
Ok all done texturing has begun....... ;D
I will show a pic so you see the colour scheme i was thinking gis a sec ;)
-
(http://www.myimgs.com/data/markyd/colours.jpg)
what do you think... I was thinking these go well together? ;)
Anything you guys would change... darker? lighter? completely different colours? ???
-
I personally would like to see what late TNG ... darker grays
just a thought ...
BTW... did ya post any updated picts of the final mesh .. ya kinda got me in suspence here bud !!
-
(http://www.myimgs.com/data/markyd/one1.jpg)
(http://www.myimgs.com/data/markyd/two2.jpg)
(http://www.myimgs.com/data/markyd/three3.jpg)
(http://www.myimgs.com/data/markyd/four4.jpg)
Darker Gray.... In sections of hull.... or the overall gray needs to be darker?
-
Hmmm if ya recall RD's version of the Sovy .. that sort of gray ( less blue tint I guess iw what I'm trying to say ) and yes .. where ever you think best .. darker gray textures ..
(some how I don't think I'm doing a good job at explaining what I'm trying to say) .. I know you will do a good job !! Heck you've done a superb job with the mesh !
-
Looks fantastic!
as for colors, can i request a second set of textures that uses dark red in place of the tan?
-
Hmmm if ya recall RD's version of the Sovy .. that sort of gray ( less blue tint I guess iw what I'm trying to say ) and yes .. where ever you think best .. darker gray textures ..
(some how I don't think I'm doing a good job at explaining what I'm trying to say) .. I know you will do a good job !! Heck you've done a superb job with the mesh !
I think I know what you mean... ;D
Looks fantastic!
as for colors, can i request a second set of textures that uses dark red in place of the tan?
Great minds think allike... I was thinking of doing a second set of textures with red instead of tan... make it look mean ;)
-
looking awsome :o
-
i like the way you started the texture you should keep them and make it another alternate texture
-
looking good !!!
:thumbsup: :thumbsup:
-
Ok Cool.... I will work on this set.... then I will make variations... i.e the sovvy theme and red theme as variations.. I will also make different reg's for each theme... one U.S.S. Wulf, U.S.S. Buzzard and U.S.S. Azel ;)
-
Ok Cool.... I will work on this set.... then I will make variations... i.e the sovvy theme and red theme as variations.. I will also make different reg's for each theme... one U.S.S. Wulf, U.S.S. Buzzard and U.S.S. Azel ;)
sorry mate I already have a ship named after me...but thanks :)
-
Hey Buzz, remember that Defiant-style light cruiser we were discussing many months ago? I think this works as it.
-
Bump for front page
-
The head is now fully done... I started on the wings yesterday but work has been a bit hectic... I'll get stuck into them a bit more tonight and then post some WIP ;)
-
Bump, why because I can.
-
Bump why, why the hell not.
-
(http://www.myimgs.com/data/markyd/prog.jpg)
not mutch to show.... again Im stuck in work at the moment and it is a mad house... hopefully im free all weekend and i'll try to catch up with some bits if i get time in the week ;)
-
NP .... if anyone understands that it's me !! ( I average about 55 to 62 hours every week) ...
Take your time and do it right !!
I appreciate your work bud !!
thanks
-
Hiya - Im really liking the front half in your last post there markyd
-
Thanks LS....
I have a couple of hours tonight so im gonna get the wings done... post progress later ;)
-
(http://www.myimgs.com/data/markyd/vigi.jpg)
wings coming along nicely.... ;)
More tommorow ;D
-
Your doing a good job keep up the good work.
-
I intend too..... need to work on them some more.... any changes you guys would make or add.... not sure what im gonna do about portholes yet... although i do plan on sticking the red stripes and fed logo on the wings ;)
-
drool
-
rofl thanks core :D
-
Looking good mate :)
-
Thanks AZ.... Your detailed drawings makes my job of texturing mutch easier ;)
-
WOWZERS great work man. You gotta start getting your ships to me or F_W so we can upload em.
-MP
-
Totally awsome :notworthy: :notworthy:keep it up
-
Wings pretty mutch done except for the logo and stripes...
(http://www.myimgs.com/data/markyd/botttomie.jpg)
(http://www.myimgs.com/data/markyd/topys.jpg)
Do they look a little dull? ???
-
OOOOO yeah that's the stuff!!!
-
I think my poor little puter strained something getting this to DL .. but it was definately worth it !!
I appreciate the efforts !!
Looks great !
-
Refrence the looking a little dull, when the rest of the vigilant is textured it will look correct. The panels I think look right for her, and it will brighten up when you add light maps, keep up the good work.
-
looking great so far Markyd awsome!!
-
Looks freakin' awesome!! ;D
-
im looking forwards to seeing this beautiful ship.
-
any chance we can get an update im iching to see what you are doing with the main hull section
-
(http://www.myimgs.com/data/markyd/vigtop.jpg)
Just touching up the wings and ilumination maps... working on the underside of the hull whilst im typing this ;D
-
DANM thats looking EXELLENT!!!!!!!
i do have a suggestion for the USS-WULF do the texture of the nose piece like a wolf's head just an idea
-
Thanks Wulf..... you guys reckon the blue section of the necelle warpy thingys (my trek tech is terrible im sure you know what I mean :D) is ok on the inside like it is....
my excuse is that they are protected their or somthing ???
he he
;)
-
it looks ok but i thought that the extruded parts of the wing where the warp grills
-
Nah... on both Buzz and Az's drawings they were grey extruded hull bitty things... I suppose I could make them blue and cage them up or somthing ???
If I get enough requests and buzz and azz give the thumbs up I have no probs in changing it.. ;D
-
Actually the "glows" were on the top and bottom of the nacelles .. Azel came up with the idea of it being on the bottom only and the nacelles swiveling into a protected position during a combat situation .. ( one which I approved ) ..
The extruded area on the outside trailing edge of the nacelles .. hmmm let me see if I can explain it ..
ya know the nacelle caps off of the TOS Enterprise ... well that is kinda what those are ... long and narrow and yes wrapping around the corner the way the are .. ( I hope you guys don't dissaprove of that too much .... but that was what I had in mind any ways)
Please note : ..... bad habit of Ol Buzzard ..... little nostalgia in just about everything I do .... some where !! ( sorry ... old habits die hard !)
-
oh OK i got ya now. that does clear that up for me
-
(http://www.myimgs.com/data/markyd/topvig.jpg)
Im gonna leave the necceles the way they are... I need to get this finished so I can get stuck into other projects ;)
Top progress.... what does it need... looks like its missing somthing.... port holes? ???
-
What you have done so far is really classy bud .. this is very nice..
just one change ... I noticed you called this the USS Buzzard???
OY .. for such a classic piece of work that you have done such a great job on ... rename the ship !! I'll entertain suggestions .. but DEFINITELY NOT "Buz" ... "Buzaard" .. ( ecch !!)
Please continue with you work !! Looks great as I've said all along .. I'm flatter that you considered and have now nearly COMPLETED the job...
thanks
-
I quite like Buzzard... think its cool..... ???
But I dont mind a name change.... but remember their will be 3 sets of textures each with a different name... the darker set will also replace the cream shade with a dark red... the blue with a dark gray and the overall ship will be a darker shade.. that will be the u.s.s. wulf ;D
-
(Ol Buzzards face turning red)
I'll leave it up to you, (particularly since you know a heck of lot about this stuff than I do ...)
carry on !!
-
:D Will Do!!! :D
;) Bed now though... more tomoz.... should have her finished by the end of the day. :'(
-
Whoa thats lookin good - nice original design! :thumbsup:
-
Hmm This is only my opinion and I wont get upset (much, well maybe Ill cry a little bit but I'll get over it eventually) if you dont dig it, but I would find a more noble name than Buzzard, thats a carrion-scavenger bird. This model is more worthy I think.
Why not Falcon, its has'nt been used (much), the model looks much more like a perigrin falcon diving on its prey than some dumd ol buzzard circling around some roadkill lol. Peregrin Falcon is also fastest animal on earth, certianly suitable for this big engined machine.
Good against the Romulans.
Just an opinion from lil ol schtupp
-
Hmm This is only my opinion and I wont get upset (much, well maybe Ill cry a little bit but I'll get over it eventually) if you dont dig it, but I would find a more noble name than Buzzard, thats a carrion-scavenger bird. This model is more worthy I think.
Why not Falcon, its has'nt been used (much), the model looks much more like a perigrin falcon diving on its prey than some dumd ol buzzard circling around some roadkill lol. Peregrin Falcon is also fastest animal on earth, certianly suitable for this big engined machine.
Good against the Romulans.
Just an opinion from lil ol schtupp
Hey Yeah I'll second that one USS Falcon or USS Pereguine far better suiting names. IIRC there's a TMP perguine out there, perhaps this could be it's replacement in the TNG era. This ships definately a predator,not a scavanger.
-MP
-
the model looks much more like a perigrin falcon diving on its prey than some dumd ol buzzard circling around some roadkill lol. Peregrin Falcon is also fastest animal on earth, certianly suitable for this big engined machine.
Good against the Romulans.
Just an opinion from lil ol schtupp
far better suiting names. IIRC there's a TMP perguine out there, perhaps this could be it's replacement in the TNG era. This ships definately a predator,not a scavanger.
-MP
My thoughts exactly ...
Dunno about a bird .... smacks of Romulan designs too much. But I defiantly like the idea of a predator derivative, variant or root.
thanks
-
Ok you guys give me a name and I'll change it ;D
-
What about USS Kestrel. Oh great job so far.
-
USS Raptor (as in Velociraptor, means (speedy) Thief)
USS Kakuru (means Rainbow serpent)
-
Ohhhh I like Raptor ;D
-
(http://www.myimgs.com/data/markyd/topbig.jpg)
-
She's lookin' sweeter with every new pic.
-
Yea Raptor is a good name - I guess my hankie can stay in its drawer :P
Buzzard would be a good name for a pirate ship.
-
RAPTOR it is then ;)
-
How about the whole name... USS VELOCIRAPTOR...there is a pre-TOS ship, with a cool patch...could be an ancestor?
-
How about the whole name... USS VELOCIRAPTOR...there is a pre-TOS ship, with a cool patch...could be an ancestor?
sweet ....
-
Nice badge, but is it possible to move the foot out of the way of the "R" & "T"?
-
Yeah Raptor is a cool name. That patch is awesome too. I'm just not keen on the insignia placement on the wings. It just doesn't look right to me.Keep up the outstanding work MarkyD !!!!!
-MP
-
(http://www.myimgs.com/data/markyd/RAPTOR.jpg)
-
hey bud ... one of those little boxes with a red "x" is all that is showing up !!
( heheheh .... what a tease !!)
:P
-
looking fantasic Markyd keep up the great work. I am really looking forward to this release :notworthy: :notworthy:
-
finished the model... conveted it to .mod and when I did I got a couple of mesh glitches... shadowy overlaps and the like.... im gonna fix em then post pics when its done... i hate welding vertices.... booooooooooooooooooooooorrrrrrrrrrrrring :-\
Is it possible to add vertices to a 3d shape?
-
finished the model... conveted it to .mod and when I did I got a couple of mesh glitches... shadowy overlaps and the like.... im gonna fix em then post pics when its done... i hate welding vertices.... booooooooooooooooooooooorrrrrrrrrrrrring :-\
Is it possible to add vertices to a 3d shape?
Yes you might want to try edit mesh>face>divide. where you click on the face will add a vertex.
-
Thanks LS.... that will be a timesaver ;)
-
Coolness :thumbsup:
-
Coolness :thumbsup:
Right on bubba !!
:thumbsup: :thumbsup: :thumbsup:
-
She looks fantastic, where can i d/l her from?
-
Bumpy Bumpy
-
Currently re-organising my life... collapse of the STGD...... ???
Back on my feet in a couple of days ;D
-
Yep heard about that, nice tag by the way, calm sailing sir.
-
I've seen what appears to be the finished product ...
most excellent !!
:notworthy: :notworthy: :notworthy:
-
Sneaky peak eh? rofl.....
Nearly finished.... the rest of you will have to wait he he ;)
-
Sneaky peak eh? rofl.....
Nearly finished.... the rest of you will have to wait he he ;)
that's cool bud ... You've done a superb job ... everyone will gladly wait for a superior product !!
I know your part of the SFC universe has been shaken a bit. So when you are ready to finish ... that will be cool.
thanks again !
-
Bump for news and/or info
-
Final touches on the damage map.. then a release ;D
-
;D ;D ;D ;D ;D
-
bumping for realease info...
Scott
-
Just got to sort out my lightmap probs then Im gonna show the final pics.. ;D
-
boy !! you sure know how to get a fellow all worked up !!
(pacing floor back and forth as expectant father )
::) ::)
-
Hey bud ... just curious .. was this ever released ?
-
Wings... I lost the texture for the wings when I wiped my puter but their redone now... soooon.. b4 xmas dude ;D
-
thanks man ... much appreciated !!
-
;D ;D ;D ;D ;D ;D ;D ;D ;D :skeptic: :screwloose: :screwloose: :screwloose: :rofl: :rofl:
-
;D
I bought a DVD writer now... shouldnt be having this problem again ;)
-
bump for news/release
-
Oops... sorry guys... gotta blow the dust of this thing and get it released ;)
Gonna work on it tomoz ;)
-
Texture faster damnit ;D :o
-
Will do ;)