Topic: Non Disclosure (Read 16168 times)

[UFP]Exeter · « **on:** July 08, 2014, 10:28:59 am »

We are at a point where a NDA becomes necessary,as there may be releases of code and test versions. If you agree just read and fill in the information and PM to me. At the end of the first paragraph add this line:

" relating to the development , testing and design of a project called Starfleet Command 4."

[UFP]Exeter · « **Reply #1 on:** July 08, 2014, 10:29:35 am »

The agreement

Corbomite · « **Reply #2 on:** July 08, 2014, 10:56:31 am »

Better repost the system specs here. No use sending out stuff to people that can't run it.

[UFP]Exeter · « **Reply #3 on:** July 08, 2014, 11:46:09 am »

System specs:
Windows Vista, sp2 NOTE:XP is NOT supported
2Gig RAM
NET 4.52 (included)

Corbomite · « **Reply #4 on:** July 08, 2014, 11:48:48 am »

Quote from: [UFP]Exeter on July 08, 2014, 11:46:09 am

System specs:
Windows Vista, sp2 NOTE:XP is NOT supported
2Gig RAM
NET 4.52 (included)

Note that these are the minimum specs. Win 7 and above are supported.

[UFP]Exeter · « **Reply #5 on:** July 08, 2014, 12:04:10 pm »

orrect. They may change for the release.

Corbomite · « **Reply #6 on:** July 08, 2014, 12:08:06 pm »

Quote from: [UFP]Exeter on July 08, 2014, 10:28:59 am

If you agree just read and fill in the information and PM to me.

I just realized that you can't send attachments via PM. You need to think of something else, or is a copy/paste of the form in a PM a legal document?

[UFP]Exeter · « **Reply #7 on:** July 08, 2014, 12:30:30 pm »

Internet law is a fuzzy fractal

Corbomite · « **Reply #8 on:** July 08, 2014, 01:23:40 pm »

True, but that doesn't solve the issue. We can send them to you in PM's or email the form back to you. Your choice.

[UFP]Exeter · « **Reply #9 on:** July 08, 2014, 01:44:59 pm »

either or

Captain Adam · « **Reply #10 on:** July 08, 2014, 06:46:25 pm »

Corbomite · « **Reply #11 on:** July 08, 2014, 06:56:36 pm »

I would assume that an actual signature is required, that's why I was asking about how to handle this. It needs to be binding or it's useless.

Captain Adam · « **Reply #12 on:** July 08, 2014, 07:13:01 pm »

[UFP]Exeter · « **Reply #13 on:** July 08, 2014, 07:14:43 pm »

Electronic is legal in the US, otherwise, needs signature

Corbomite · « **Reply #14 on:** July 08, 2014, 07:19:23 pm »

Well I think we have a few "out of towners" as it were hoping to work on this, but it's your property to protect.

Captain Adam · « **Reply #15 on:** July 08, 2014, 07:20:02 pm »

[UFP]Exeter · « **Reply #16 on:** July 08, 2014, 08:17:56 pm »

Electronic signature is ok. Just need you rel name and dyna handle.

Tulwar · « **Reply #17 on:** July 09, 2014, 12:15:38 am »

Where there is a whip, there is a way.

Captain Adam · « **Reply #18 on:** July 09, 2014, 09:05:14 am »

[UFP]Exeter · « **Reply #19 on:** July 09, 2014, 09:07:24 am »

drdon@centurytel.net

Captain Adam · « **Reply #20 on:** July 09, 2014, 09:09:03 am »

FPF-DieHard · « **Reply #21 on:** July 09, 2014, 09:31:46 am »

I'm not signing a "blank check" of an NDA. If you can't make it more specific I've gotta be out.

[UFP]Exeter · « **Reply #22 on:** July 09, 2014, 09:38:34 am »

It is a blnk form I got from online legal forms.

[UFP]Exeter · « **Reply #23 on:** July 09, 2014, 09:42:11 am »

At the end of the first paragraph you can add this line if you wish.

Quote

relating to the development , testing and design of a project called Starfleet Command 4.

Javora · « **Reply #24 on:** July 09, 2014, 04:40:38 pm »

Sounds good Exeter, I'm going to resend with that line attached.

Lieutenant_Q · « **Reply #25 on:** July 13, 2014, 01:59:44 pm »

I cannot seem to send an attachment via PM... I can send one on a normal thread, but not via a PM...

Corbomite · « **Reply #26 on:** July 13, 2014, 02:55:14 pm »

Quote from: Lieutenant_Q on July 13, 2014, 01:59:44 pm

I cannot seem to send an attachment via PM... I can send one on a normal thread, but not via a PM...

Just copy and paste the form into the PM and send. It counts as legal from what Exeter said.

Chetech · « **Reply #27 on:** July 16, 2014, 06:26:59 am »

Hi, I'm new here and I would like to sign the document for testing purposes only.

Can I do that, or should I wait until you guys have something playable in your hands? Sadly I can give you only this kind of support.

Corbomite · « **Reply #28 on:** July 16, 2014, 08:26:12 am »

Quote from: Chetech on July 16, 2014, 06:26:59 am

Hi, I'm new here and I would like to sign the document for testing purposes only.

Can I do that, or should I wait until you guys have something playable in your hands? Sadly I can give you only this kind of support.

That kind of support is fine. It is ultimately up to Exeter to make that call. I'll speak with him as soon as I can. Thanks for showing interest.

Fallen_Warrior · « **Reply #29 on:** February 13, 2016, 12:40:10 am »

News:

Topic: Non Disclosure (Read 16168 times) var addthis_config = {"data_track_clickback":true};

Topic: Non Disclosure (Read 16168 times)