Topic: OT: You have to see this !!! WOW (Read 6143 times)

I, Mudd. · « **Reply #60 on:** January 06, 2008, 12:45:01 pm »

I tend to agree ... anything smaller sacrifices too much ...

F9thCenturus · « **Reply #61 on:** January 06, 2008, 01:40:43 pm »

Agreed. Personally, I wouldn't mind seeing the final ship be more around 8-9k polies. :-D But that's just me. :-D

Lord Schtupp · « **Reply #62 on:** January 06, 2008, 01:43:03 pm »

Awesome model Rod!

Rod ONeal · « **Reply #63 on:** January 09, 2008, 05:03:21 pm »

Here's an update. Started texturing the engineering section. Hope ya like it so far. I have a lot of details to add all over the model, but she's coming together.
Hearty thanks for the positive comments. It's very encouraging.
Great to see Lord Schtupp is still hanging around. I consider many of your models to still be the standards.

Bernard Guignard · « **Reply #64 on:** January 09, 2008, 05:27:55 pm »

Very Nice Rod.

Fallen_Warrior · « **Reply #65 on:** January 10, 2008, 08:09:01 am »

rod, its a dirty looking star ship i thank you that weathering looks fantastic, seriously great job, try to get a bit more near the edges of the hull plates though as it looks a bit more realistic, but seriously this is already shaping up to be your best yet

Rod ONeal · « **Reply #66 on:** January 10, 2008, 12:20:18 pm »

Quote from: Fallen_Warrior on January 10, 2008, 08:09:01 am

rod, its a dirty looking star ship i thank you that weathering looks fantastic, seriously great job, try to get a bit more near the edges of the hull plates though as it looks a bit more realistic, but seriously this is already shaping up to be your best yet

The weathering so far is just a random photoshop pattern. I haven't actually applied anything to specific areas. I'll make sure that I do though. The plating needs a bit more work too.

Thanks

F9thCenturus · « **Reply #67 on:** January 10, 2008, 12:31:56 pm »

If you need an SFC3 porter, don't hesitate to ask. I'd love to get my hands on this baby.

Rod ONeal · « **Reply #68 on:** January 11, 2008, 01:38:20 am »

Quote from: F9thCenturus on January 10, 2008, 12:31:56 pm

If you need an SFC3 porter, don't hesitate to ask. I'd love to get my hands on this baby.

Thanks, I sure will.

Dizzy · « **Reply #69 on:** January 11, 2008, 07:21:50 am »

Quote from: Rod ONeal on January 09, 2008, 05:03:21 pm

Hearty thanks for the positive comments. It's very encouraging.

You are on fire!

Lord Schtupp · « **Reply #70 on:** January 11, 2008, 08:26:44 am »

Yea Ill say cant wait to see it with the textures dialed in

I, Mudd. · « **Reply #71 on:** January 11, 2008, 10:17:18 am »

I sooo cannot wait to get ahold of this ...

JM.

Cptn_Pestalence_XC · « **Reply #72 on:** January 12, 2008, 11:02:01 pm »

Here is a up close image of the ship from YouTube.. just to help with the details and coloring.. hope this helps.

http://www.youtube.com/watch?v=O9vnP_x63pY

Fedman NCC-3758 · « **Reply #73 on:** January 12, 2008, 11:09:46 pm »

Is this baby available?

http://www.youtube.com/watch?v=-35xvtHkEi8&NR=1

F9thCenturus · « **Reply #74 on:** January 13, 2008, 01:51:53 am »

Quote from: Fedman NCC-3758 on January 12, 2008, 11:09:46 pm

Is this baby available?

http://www.youtube.com/watch?v=-35xvtHkEi8&NR=1

Battleclinic has a couple. However, personally, I would love to see a new mesh made. The ones available are a bit too outdated for my tastes.

Rod ONeal · « **Reply #75 on:** January 13, 2008, 02:26:00 am »

Quote from: Pestalence_XC on January 12, 2008, 11:02:01 pm

Here is a up close image of the ship from YouTube.. just to help with the details and coloring.. hope this helps.

http://www.youtube.com/watch?v=O9vnP_x63pY

Thanks, Pestalence. I hadn't seen this one, before. I did pick up a couple of details from it.

ModelsPlease · « **Reply #76 on:** January 13, 2008, 08:44:41 am »

Not to get away form this but has anyone seen this version ?

http://www.youtube.com/watch?v=66r0jlYq6jA&feature=related

Isn't the author a BC'er if so where the model ? And more important can we port it ? LOL

Shadowfleet · « **Reply #77 on:** January 13, 2008, 12:43:46 pm »

Rod - I think she's a beauty. Nice job! I know you didn't design her but your mesh is very accurate and he weathered texturing really give it the feel I think hte author intented. Very nice indeed.

Cromwell · « **Reply #78 on:** January 13, 2008, 02:46:58 pm »

I love what your doing with that ship rod, I can't wait for the finished product. Hopefully a public sfc release? eh? That's a gorgeous job done on a beautiful ship.

F9thCenturus · « **Reply #79 on:** January 13, 2008, 03:09:06 pm »

Quote from: ModelsPlease on January 13, 2008, 08:44:41 am

Not to get away form this but has anyone seen this version ?

http://www.youtube.com/watch?v=66r0jlYq6jA&feature=related

Isn't the author a BC'er if so where the model ? And more important can we port it ? LOL

Nope. I think it's only CGI. Someone would have to make a game version.

Whatever happened to that Connie concept I had posted some time back from Scifi Meshes.com?

Cptn_Pestalence_XC · « **Reply #80 on:** January 13, 2008, 03:37:50 pm »

Quote from: Rod ONeal on January 13, 2008, 02:26:00 am

Quote from: Pestalence_XC on January 12, 2008, 11:02:01 pm
Here is a up close image of the ship from YouTube.. just to help with the details and coloring.. hope this helps.

http://www.youtube.com/watch?v=O9vnP_x63pY

Thanks, Pestalence. I hadn't seen this one, before. I did pick up a couple of details from it.

NP.. The model of the CG Enterprise used on YouTube was originally created by Gabe Koerner from CG Channel.

Eden FX has done a lot of work on Trek shows like Voyager, TNG, and DS 9. Here is an interview from a while back with Eden FX's spokesperson. He chats about some of their earlier work. I dunno if Eden or the producers of Star Trek XI are looking at the model.. but I'll see what I can dig up.

http://cgchannel.com/news/viewfeature.jsp?newsid=2098

I'll see if Gabe has any postings about the model he is using for YouTube films.

Age · « **Reply #81 on:** January 13, 2008, 04:10:28 pm »

Pest. is more right about it as this is what one of our reader had to post about it over at STG. on.Star Trek XI

Cptn_Pestalence_XC · « **Reply #82 on:** January 13, 2008, 06:09:08 pm »

Quote from: Age on January 13, 2008, 04:10:28 pm

Pest. is more right about it as this is what one of our reader had to post about it over at STG. on.Star Trek XI

Gabriel koerner's ship is 1 of 3 ships being considered. Seeing as how Ryan Church is already working CGI on the Trek film, it might be Ryan's design, however there is no pics of Ryans ship online at the moment. the third ship I believe is the CGI reenhanced version from TOS on the remastered disks. I think both Ryan and Gabe did some work on those. But you can go to ...

http://www.gabekoerner.com/ent/

and see the ship in almost a step by step process of being made in CGI.. there are a lot of detail on it there.

Cptn_Pestalence_XC · « **Reply #83 on:** January 19, 2008, 08:56:01 am »

Well the Movie version is showing it's head.. here is the screen shot of the Enterprise under construction

looks a lot like Gabe's ship but until we get a full view of her, it may just be and enhanced version of the TOS ship before it's painted the thermal coat Grey.

Here is Gabe's ship from the front.

So what do you guys think so far?

Possible match?

To me the ship from the Teaser Trailer looks more like the CGI Enhanced version of TOS than it does Gabe's ship.. I don't think they changed the ship.. I believe they stuck to Canon concerning the ship.

but Gabe's ship would sure be cool to have in the game and the model render above is looking fantastic.. keep the great work up !!!!

I, Mudd. · « **Reply #84 on:** January 19, 2008, 09:01:09 am »

The overall shape of the nacelles DOES look like Gabe's influence ... but we need more to be sure. Looks GREAT in any case.

JM.

Vipre · « **Reply #85 on:** January 19, 2008, 01:43:01 pm »

It may be influenced but it's not an exact match to the Gabe pic above.

The trailer E has a plate seam running right along the center line, Gabe's has two each off center. The name Enterprise in the trailer is very straight while Gabe's shows a clear curve. The nacelle domes look a lot alike, both have a large circle in the center. The bridge structures also look alike.

The nacelles in the trailer pic seem awfully close to the primary hull, could just be an optical illusion. Here's hoping they didn't turn it into an upside down Miranda.

I, Mudd. · « **Reply #86 on:** January 19, 2008, 02:24:46 pm »

If memory serves, and I may be wrong about this, The Enterprise was built in San Francisco, and assembled in orbit, so what we could be seeing really more bare bones than it first appears.

But then again, looking at Gabe's model, we also see how close the nacelles appear to the Primary hull.

GK has publically stated that he did not produce a model that would be used as the Enterprise in the new Trek movie ... just that his and two other designs were being considered. This is why I said 'influenced' rather than, 'yep, it's Gabe's model'. Not ruling out his influence, not saying he had any ... Honestly, folks, it's just way too early to tell.

This is fun though, isn't it ... new designs, new ideas ... gets the cobwebs dusted out of the old bonebox ... fertile ground for a starship designer/model builder ...

JM.

Vipre · « **Reply #87 on:** January 19, 2008, 04:11:19 pm »

Quote from: I, Mudd. on January 19, 2008, 02:24:46 pm

If memory serves, and I may be wrong about this, The Enterprise was built in San Francisco, and assembled in orbit, so what we could be seeing really more bare bones than it first appears.

How great would that be, seeing them load the components onto surface to orbit sleds and slip through the sky into orbit. Completely impractical but cool none the less.

Rod ONeal · « **Reply #88 on:** January 19, 2008, 10:42:02 pm »

It looks a bit more than just, influenced by it. The bridge looks pretty much spot on, to me. Maybe I'm being influenced somehow, because the more that I look at it the more it looks like Gabe's. The intercoolers don't look right though, and the registry is obviously different. Might possibly have plasma injectors (I think that's what they are?) on the side of the nacelles, which Gabe's Ent doesn't have. Possibly could be another update of it?

Bernard Guignard · « **Reply #89 on:** January 20, 2008, 09:22:41 am »

Hello all
Keep in mind that this is a Teaser and the final product may look radically different Any one remember the Phase 2 poster they Released for TMP when they announced that there was going to be a movie does that match the final TMP model ?

News:

Author Topic: OT: You have to see this !!! WOW (Read 6143 times)