Topic: OT: You have to see this !!! WOW (Read 6521 times)

ModelsPlease · « **on:** August 13, 2007, 06:23:53 am »

Words just don't do this justice..............

Movie
http://www.gabekoerner.com/ent/trekreel002.mov

Furyofaseraph · « **Reply #1 on:** August 13, 2007, 08:13:52 am »

I've seen. It's very Atolmian.
I wonder how long it will take for there to be a game model.

Red_Sharif · « **Reply #2 on:** August 13, 2007, 09:23:17 am »

Quote from: Furyofaseraph on August 13, 2007, 08:13:52 am

I wonder how long it will take for there to be a game model.

Didn't someone mention in an earlier thread that this model was in development? And I hope this model becomes reality sooner rather than later.

Vipre · « **Reply #3 on:** August 13, 2007, 01:09:30 pm »

Knew it was just a matter of time. I wonder how trek series models would have evolved over the last 40 years had this been the original series Enterprise.

Furyofaseraph · « **Reply #4 on:** August 13, 2007, 03:21:57 pm »

Global Illumination error in the left rear nacelle.. he might want to take a look at that.

Don Karnage · « **Reply #5 on:** August 13, 2007, 05:54:46 pm »

cool model, that will make a great x tech ship for the tos period

CC22 · « **Reply #6 on:** August 13, 2007, 07:30:05 pm »

That is F***ing gorgeous! Don't get me wrong, TOS is great and the design of 1701 is a classic, but if they were to redo the series with this in it, then if for no other reason it would get my vote lol.

Shadowfleet · « **Reply #7 on:** August 13, 2007, 08:02:23 pm »

This isn't off topic! It NEEDS to be modelled for SFC! Way cool.

Norsehound · « **Reply #8 on:** August 14, 2007, 01:09:49 am »

*grabs at model*

Thought this ship was great in the "ships of the line" book.

My only gripe is that the primary hull doesn't seem to be perfectly circular... but everything else about it makes me wants it bad!

Rod ONeal · « **Reply #9 on:** August 14, 2007, 02:19:58 am »

Quote from: Red_Sharif on August 13, 2007, 09:23:17 am

Quote from: Furyofaseraph on August 13, 2007, 08:13:52 am
I wonder how long it will take for there to be a game model.

Didn't someone mention in an earlier thread that this model was in development? And I hope this model becomes reality sooner rather than later.

I was working on a low poly version. She's at around 7K polies and I thought it was a bit high and needed to be refined. I was working off of an earlier untextured version of the model. That's why my textures don't match Gabe's. Looks like he might have changed a couple things on the mesh, as well. The bridge, for one thing (Which I really spent a lot of time on, unfortunately

).
Anyway, here's the version that I was working on. I haven't done anything on it for a few months now.

ModelsPlease · « **Reply #10 on:** August 14, 2007, 02:32:00 am »

It looks like he changed the impulse engine area as well, but that is an outstanding start Rod

Rod ONeal · « **Reply #11 on:** August 14, 2007, 02:43:10 am »

Yeah, MP. There's a lot of minor changes all over it, actually. The Impulse style was rolled back a lot. The version in the pics you're showing is quite a bit "less styled". Way way beter a TOS feel. I'll definatley redo it like the one you got here. I was making it a BB for SFC because of the rear firing torps. Plus, scale wise, it looked a lot bigger than the TOS or TMP Enterprise. She looked more like 500 meters than 300 in the version I was working with. (Thus the name USS Athena.)

The 2ndry hull looks a whole heap like Atolms TMP FDN, which is the older design of the 2. Not saying that Gabe's isn't original. Just stating that Atolm never saw Gabe's before he designed his DN.

Starforce2 · « **Reply #12 on:** August 14, 2007, 03:44:18 am »

nice one rod. both of these seem to stem from that design from the ship of the line calendar that basicly had a heavily nx-ified tos connie.

Darkdrone · « **Reply #13 on:** August 14, 2007, 12:26:12 pm »

Quote from: Rod ONeal on August 14, 2007, 02:19:58 am

Quote from: Red_Sharif on August 13, 2007, 09:23:17 am
Quote from: Furyofaseraph on August 13, 2007, 08:13:52 am
I wonder how long it will take for there to be a game model.

Didn't someone mention in an earlier thread that this model was in development? And I hope this model becomes reality sooner rather than later.

I was working on a low poly version. She's at around 7K polies and I thought it was a bit high and needed to be refined. I was working off of an earlier untextured version of the model. That's why my textures don't match Gabe's. Looks like he might have changed a couple things on the mesh, as well. The bridge, for one thing (Which I really spent a lot of time on, unfortunately ).
Anyway, here's the version that I was working on. I haven't done anything on it for a few months now.

liking your textures far more m8 looks far nicer

DD

ModelsPlease · « **Reply #14 on:** August 14, 2007, 02:46:18 pm »

DD makes a good point, why not also keep your as a TMP refit of this beauty? Ya know loose the def sat dish keep your impulse area and bridge etc........

Rod ONeal · « **Reply #15 on:** August 15, 2007, 12:19:32 am »

I'm gonna do a total remake. I think that I can shave quite a lot of polies off for the latter design. I'm not going to throw this mesh away though. If there's a desire for 2 versions I can do as you suggest.
I would like to attempt an accurate low poly version of the final design, though. Just for my own personal satisfaction. Game res accurate, at least.

ModelsPlease · « **Reply #16 on:** August 15, 2007, 03:48:01 am »

Quote from: Rod ONeal on August 15, 2007, 12:19:32 am

I'm gonna do a total remake. I think that I can shave quite a lot of polies off for the latter design. I'm not going to throw this mesh away though. If there's a desire for 2 versions I can do as you suggest.
I would like to attempt an accurate low poly version of the final design, though. Just for my own personal satisfaction. Game res accurate, at least.

Red_Sharif · « **Reply #17 on:** August 15, 2007, 11:08:02 pm »

Quote from: Rod ONeal on August 14, 2007, 02:19:58 am

Quote from: Red_Sharif on August 13, 2007, 09:23:17 am
Quote from: Furyofaseraph on August 13, 2007, 08:13:52 am
I wonder how long it will take for there to be a game model.

Didn't someone mention in an earlier thread that this model was in development? And I hope this model becomes reality sooner rather than later.

I was working on a low poly version. She's at around 7K polies and I thought it was a bit high and needed to be refined. I was working off of an earlier untextured version of the model. That's why my textures don't match Gabe's. Looks like he might have changed a couple things on the mesh, as well. The bridge, for one thing (Which I really spent a lot of time on, unfortunately ).
Anyway, here's the version that I was working on. I haven't done anything on it for a few months now.

Oh wow...

Rod, get this done please. I'll airmail you some of my wife's homemade brownies, if you do.

Red_Sharif · « **Reply #18 on:** November 07, 2007, 07:47:14 pm »

Just curious to know if you have had a chance to work on your version of this beautiful model, Rod.

NavigatorNCC2120 · « **Reply #19 on:** November 11, 2007, 11:54:31 am »

Quote from: CC22 on August 13, 2007, 07:30:05 pm

That is F***ing gorgeous! Don't get me wrong, TOS is great and the design of 1701 is a classic, but if they were to redo the series with this in it, then if for no other reason it would get my vote lol.

Who knows maybe JJ Abrams will use this ship design in Star Trek 11, due out on December 25, 2008. They just started shooting on Wednesday, November 7, 2007 (4 days ago) through March 2008. Leonard Nimoy will play old Spock and Zachary Quinto (Heroes' Sylar) will play young Spock, along with Bruce Greenwood as Captain Christopher Pike and many other familiar TOS characters.

Here is a link to Star Trek 11 IMBD page:
http://www.imdb.com/title/tt0796366/

Here is a link to Trek Movie:
http://www.trekmovie.com/

Navigator NCC-2120 USS Entente
/\

ModelsPlease · « **Reply #20 on:** November 27, 2007, 12:48:15 am »

BUMP for Rod, any updates on yours ?

Rod ONeal · « **Reply #21 on:** November 27, 2007, 03:15:31 am »

I have a new mesh that I'm texturing ATM. I'm gonna try real hard for Christmas release, if I can get permission from GK.

darkthunder · « **Reply #22 on:** November 27, 2007, 11:02:50 pm »

Would love to see some pics of your version, textured or un-textured doesn't matter

Rod ONeal · « **Reply #23 on:** November 28, 2007, 04:26:49 pm »

Well, it's at a really unflattering point in the texturing right now. I'll get a little further along and post some pics.

Red_Sharif · « **Reply #24 on:** December 30, 2007, 01:00:17 am »

Quote from: Rod ONeal on November 27, 2007, 03:15:31 am

I have a new mesh that I'm texturing ATM. I'm gonna try real hard for Christmas release, if I can get permission from GK.

Perhaps a New Year's release?

GotAFarmYet? · « **Reply #25 on:** December 30, 2007, 02:02:21 am »

Quote from: Red_Sharif on December 30, 2007, 01:00:17 am

Quote from: Rod ONeal on November 27, 2007, 03:15:31 am
I have a new mesh that I'm texturing ATM. I'm gonna try real hard for Christmas release, if I can get permission from GK.

Perhaps a New Year's release?

He never said what year andthings take as long as they take

Cptn_Pestalence_XC · « **Reply #26 on:** December 30, 2007, 03:30:27 am »

I have that ship as my desktop.. It Rocks..

Red_Sharif · « **Reply #27 on:** December 30, 2007, 02:15:57 pm »

Quote from: GotAFarmYet? on December 30, 2007, 02:02:21 am

Quote from: Red_Sharif on December 30, 2007, 01:00:17 am
Quote from: Rod ONeal on November 27, 2007, 03:15:31 am
I have a new mesh that I'm texturing ATM. I'm gonna try real hard for Christmas release, if I can get permission from GK.

Perhaps a New Year's release?

He never said what year andthings take as long as they take

I thought the '

' would be enough to let everyone know that I was foolin' around. Guess not...

Fedman NCC-3758 · « **Reply #28 on:** December 30, 2007, 02:22:24 pm »

I concur ... very nice.

Must plant listening post ......

Rod ONeal · « **Reply #29 on:** January 03, 2008, 02:40:39 am »

Well, I haven't managed to stick to any timetable on this. Here's some WIP pics. It's an all new mesh made from MP's reference pics.. Not the one I had shown earlier. I believe that the reference pics were stretched. I don't think it was supposed to have an oblong saucer. So, I corrected them and then made the mesh. I'm going to concentrate on her a bit more, promise. I did the nacelle textures today. I'll probably work a bit on the pylons tonight as well.

News:

Author Topic: OT: You have to see this !!! WOW (Read 6521 times)