Topic: Hows the performance of the gagarn?<-those who wanted the ships check yur mail (Read 4891 times)

Starforce2 · « **on:** March 16, 2008, 09:26:02 pm »

I'm cuious how this runs in SFC? I have a ship I can pass along from longisland26, a Legacy modder, that has only around 2k more poly than the gagarn. If you guys think 15k and change will run I'll drop the ship over here for proper converting.

Red_Sharif · « **Reply #1 on:** March 16, 2008, 09:56:58 pm »

Quote from: Starforce2 on March 16, 2008, 09:26:02 pm

I'm cuious how this runs in SFC? I have a ship I can pass along from longisland26, a Legacy modder, that has only around 2k more poly than the gagarn. If you guys think 15k and change will run I'll drop the ship over here for proper converting.

If you are referring to AsylUm's Gagarin, I've used Atheorhaven's port extensively in SFC:OP with no issues. Aside from a minor texturing issue on the nacelles, the ship is flawless. My rig is decent, if dated...about three years old.

Centurus · « **Reply #2 on:** March 16, 2008, 10:02:33 pm »

15K for a ship is nearing the poly limit for SFC3. I do not know the poly limit for SFC2/OP, but I would imagine that the same would apply as well.

I haven't used the Gagarin in SFC3 yet. Been kinda lazy about getting her speced out. But, if you want, send tha model this way and we'll gladly see how she runs in SFC.

Can't hurt to try.

Starforce2 · « **Reply #3 on:** March 16, 2008, 10:27:48 pm »

Ok, what email would you like me to send it to? It's pushing 7000k, well over the attach limit for the board.

And Red, what are those nacelle issues ya were refering to?

Centurus · « **Reply #4 on:** March 16, 2008, 10:36:50 pm »

Hmmm....good question. I think in this case we should gather up a mailing list for this particular ship. Anyone who wants to test her out.

Send mine to either Golden_Centurion@hotmail.com or F9thCenturus@gmail.com

Kreeargh · « **Reply #5 on:** March 16, 2008, 10:41:08 pm »

Quote from: F9thCenturus on March 16, 2008, 10:02:33 pm

15K for a ship is nearing the poly limit for SFC3. I do not know the poly limit for SFC2/OP, but I would imagine that the same would apply as well.

I haven't used the Gagarin in SFC3 yet. Been kinda lazy about getting her speced out. But, if you want, send tha model this way and we'll gladly see how she runs in SFC.

Can't hurt to try.

By my own experiance sfcop can run my 47580 poly tiger tank model but the lag is horrable

Centurus · « **Reply #6 on:** March 16, 2008, 10:44:31 pm »

Quote from: Kreeargh on March 16, 2008, 10:41:08 pm

Quote from: F9thCenturus on March 16, 2008, 10:02:33 pm
15K for a ship is nearing the poly limit for SFC3. I do not know the poly limit for SFC2/OP, but I would imagine that the same would apply as well.

I haven't used the Gagarin in SFC3 yet. Been kinda lazy about getting her speced out. But, if you want, send tha model this way and we'll gladly see how she runs in SFC.

Can't hurt to try.

By my own experiance sfcop can run my 47580 poly tiger tank model but the lag is horrable

You've got to be sh***ing me!!!! Seriously????

Starforce2 · « **Reply #7 on:** March 16, 2008, 10:49:24 pm »

Quote from: F9thCenturus on March 16, 2008, 10:36:50 pm

Hmmm....good question. I think in this case we should gather up a mailing list for this particular ship. Anyone who wants to test her out.

Send mine to either Golden_Centurion@hotmail.com or F9thCenturus@gmail.com

Ok, tomarrow sometime I will send it (hopefully I wont forget lol) and I think it's in 3ds (there's also milkshape file) so it will obviously need to be messed with first as I don't know the porting process and I'll also send you the authors email so you can keep him aprised of the release status. He has more than one ship and intends to send more, I believe they are all roughly on the same poly level.

Kreeargh · « **Reply #8 on:** March 16, 2008, 10:53:52 pm »

Quote from: F9thCenturus on March 16, 2008, 10:44:31 pm

Quote from: Kreeargh on March 16, 2008, 10:41:08 pm
Quote from: F9thCenturus on March 16, 2008, 10:02:33 pm
15K for a ship is nearing the poly limit for SFC3. I do not know the poly limit for SFC2/OP, but I would imagine that the same would apply as well.

I haven't used the Gagarin in SFC3 yet. Been kinda lazy about getting her speced out. But, if you want, send tha model this way and we'll gladly see how she runs in SFC.

Can't hurt to try.

By my own experiance sfcop can run my 47580 poly tiger tank model but the lag is horrable

You've got to be sh***ing me!!!! Seriously????

Yea ive got some screen caps of it in game and also my other super high poly model for me any way the edmund fitgerald it works in game its around 20000 poly

Red_Sharif · « **Reply #9 on:** March 16, 2008, 11:10:29 pm »

Put me on that mailing list as well, please...

p.chris.hughes@gmail.com

Thank ya.

Tus-XC · « **Reply #10 on:** March 16, 2008, 11:24:41 pm »

EAW/OP don't have a poly limit like 3 does, so 14k is fine. Its really textures that cause slow downs for future reference. Some people will complain though if you release something that big... i can almost guarantee it...

Centurus · « **Reply #11 on:** March 16, 2008, 11:27:01 pm »

Quote from: Kreeargh on March 16, 2008, 10:53:52 pm

Quote from: F9thCenturus on March 16, 2008, 10:44:31 pm
Quote from: Kreeargh on March 16, 2008, 10:41:08 pm
Quote from: F9thCenturus on March 16, 2008, 10:02:33 pm
15K for a ship is nearing the poly limit for SFC3. I do not know the poly limit for SFC2/OP, but I would imagine that the same would apply as well.

I haven't used the Gagarin in SFC3 yet. Been kinda lazy about getting her speced out. But, if you want, send tha model this way and we'll gladly see how she runs in SFC.

Can't hurt to try.

By my own experiance sfcop can run my 47580 poly tiger tank model but the lag is horrable

You've got to be sh***ing me!!!! Seriously????

Yea ive got some screen caps of it in game and also my other super high poly model for me any way the edmund fitgerald it works in game its around 20000 poly

Incredible. Simply incredible.

Centurus · « **Reply #12 on:** March 16, 2008, 11:28:41 pm »

Quote from: Tus on March 16, 2008, 11:24:41 pm

EAW/OP don't have a poly limit like 3 does, so 14k is fine. Its really textures that cause slow downs for future reference. Some people will complain though if you release something that big... i can almost guarantee it...

I think you can certainly guarantee it.

But it is very interesting to know that SFC2 and OP don't have poly limits. The poly limit for SFC3 might have been one of the code issues that Taldren was never able to address.

Kreeargh · « **Reply #13 on:** March 17, 2008, 01:42:44 am »

Quote from: Tus on March 16, 2008, 11:24:41 pm

EAW/OP don't have a poly limit like 3 does, so 14k is fine. Its really textures that cause slow downs for future reference. Some people will complain though if you release something that big... i can almost guarantee it...

I dont want to argue about this but my tank only has 1 512 x 512 color map poly count does have some lag problems

Tus-XC · « **Reply #14 on:** March 17, 2008, 03:47:25 am »

well i should clarify, when we are dealing w/ poly counts from 1k- 15k, its the textures that cause the majority of the performance issues

Starforce2 · « **Reply #15 on:** March 17, 2008, 05:50:06 am »

Well folks, when I get home from work this afternoon, there will be a second ship...a Kumari...I just got the pm for handing that over to SFC modders sometime overnight.

Starforce2 · « **Reply #16 on:** March 17, 2008, 08:42:47 pm »

ya should have yur ships.

ModelsPlease · « **Reply #17 on:** March 18, 2008, 07:56:18 am »

Send one my way SF

Starforce2 · « **Reply #18 on:** March 18, 2008, 10:19:06 am »

What email? Ya need something that can take 7 meg unless you want to get on msn...

atheorhaven · « **Reply #19 on:** March 18, 2008, 10:35:43 am »

Quote from: Red_Sharif on March 16, 2008, 09:56:58 pm

If you are referring to AsylUm's Gagarin, I've used Atheorhaven's port extensively in SFC:OP with no issues. Aside from a minor texturing issue on the nacelles, the ship is flawless. My rig is decent, if dated...about three years old.

If I get some time one of these evenings, I'll go back to the mesh and see if I can't fix that. It happened during the .MOD export I think, it didn't look like that before..

Red_Sharif · « **Reply #20 on:** March 18, 2008, 02:02:21 pm »

Quote from: atheorhaven on March 18, 2008, 10:35:43 am

Quote from: Red_Sharif on March 16, 2008, 09:56:58 pm
If you are referring to AsylUm's Gagarin, I've used Atheorhaven's port extensively in SFC:OP with no issues. Aside from a minor texturing issue on the nacelles, the ship is flawless. My rig is decent, if dated...about three years old.

If I get some time one of these evenings, I'll go back to the mesh and see if I can't fix that. It happened during the .MOD export I think, it didn't look like that before..

I'm sure your time is at a premium, but if you can revisit this, I'd greatly appreciate it.

atheorhaven · « **Reply #21 on:** March 18, 2008, 03:29:10 pm »

Quote from: Red_Sharif on March 18, 2008, 02:02:21 pm

I'm sure your time is at a premium, but if you can revisit this, I'd greatly appreciate it.

Premium is about right.. I usually work on SFC at the expense of getting a lot of sleep.

But it does need to be fixed.. the original mesh as sent over didn't have it, so exporting it shouldn't add errors to a great mesh..

Starforce2 · « **Reply #22 on:** March 21, 2008, 02:53:07 pm »

centarus I've not heard form you...did the mail go through?

Centurus · « **Reply #23 on:** March 21, 2008, 03:01:04 pm »

I knew I forgot to do something. I'll check either later today or sometime during the weekend.

I don't know what I ate, but damn I've beeen spewing some noxious gas that would make Satan reach for the air freshener.

Centurus · « **Reply #24 on:** March 21, 2008, 03:02:28 pm »

*smacks SF with a rubber chicken and turns him into Barbara Streisand's nose*

Get a better spellchecker.

Starforce2 · « **Reply #25 on:** March 21, 2008, 04:13:12 pm »

Quote from: F9thCenturus on March 21, 2008, 03:01:04 pm

I knew I forgot to do something. I'll check either later today or sometime during the weekend.

I don't know what I ate, but damn I've beeen spewing some noxious gas that would make Satan reach for the air freshener.

F9thCenturdus?

Centurus · « **Reply #26 on:** March 21, 2008, 06:58:49 pm »

Quote from: Starforce2 on March 21, 2008, 04:13:12 pm

Quote from: F9thCenturus on March 21, 2008, 03:01:04 pm
I knew I forgot to do something. I'll check either later today or sometime during the weekend.

I don't know what I ate, but damn I've beeen spewing some noxious gas that would make Satan reach for the air freshener.

F9thCenturdus?

*smacks SF again and turns him into Rosie O'Donnell's last tampon*

Centurus · « **Reply #27 on:** March 26, 2008, 12:05:21 am »

Well, I decided to take a look at the ships. They look very nice. I recognize the Sentinel from Legacy UU. Not a bad ship. Not my personal choice for a Fed, but she's alright. Could do with better textures, but that's just me.

The Kumari is also nicely constructed. However, the lightmaps could use some enhancement, especially when it comes to the impulse engines and a couple other things. They barely show at all in MAX under Radiosity.

News:

Topic: Hows the performance of the gagarn?<-those who wanted the ships check yur mail (Read 4891 times) var addthis_config = {"data_track_clickback":true};

Topic: Hows the performance of the gagarn?<-those who wanted the ships check yur mail (Read 4891 times)